|
[1]
|
Luo, J., Zhu, L. and Yan, G. (2015) Novel Quadrotor Forward-Flight Model Based on Wake Interference. AIAA Journal, 53, 1-12. [Google Scholar] [CrossRef]
|
|
[2]
|
李伟伟. 植保无人机在现代智慧农业建设中的应用研究[J]. 智慧农业导刊, 2021, 1(21): 1-3.
|
|
[3]
|
刘雪松, 昂海松, 肖天航. 悬停状态旋翼间干扰对四旋翼升力影响分析[J]. 航空工程进展, 2014, 5(2): 148-153. [Google Scholar] [CrossRef]
|
|
[4]
|
董宁, 王立峰. 基于增量式非线性动态逆的四旋翼无人机姿态控制[J]. 动力系统与控制, 2018, 7(4): 253-261. [Google Scholar] [CrossRef]
|
|
[5]
|
L. X.L. and Guo, Y.Y. (2018) Fault Tolerant Control of a Quadrotor UAV Using Control Allocation. 2018 Chinese Control and Decision Conference (CCDC), Shenyang, 09-11 June 2018. [Google Scholar] [CrossRef]
|
|
[6]
|
李煜, 刘小雄, 明瑞晨, 等. 基于L1自适应结构的动态逆飞行控制方法研究[J]. 西北工业大学学报, 2021, 39(5): 995-1004.
|
|
[7]
|
郝伟, 鲜斌. 四旋翼无人机姿态系统的非线性容错控制设计[J]. 控制理论与应用, 2015, 32(11): 1457-1463.
|
|
[8]
|
Bresciani, T. (2008) Modelling, Identification and Control of a Quadrotor Helicopter.
|
|
[9]
|
Hoffmann, G.M., Huang, H., Waslander, S.L., et al. (2011) Precision Flight Control for a Mul-ti-Vehicle Quadrotor Helicopter Testbed. Control Engineering Practice, 19, 1023-1036. [Google Scholar] [CrossRef]
|
|
[10]
|
Mahony, R, Kumar, V., et al. (2012) Multirotor Aerial Vehicles: Modeling, Estimation, and Control of Quadrotor. Robotics & Automation Magazine IEEE, 19, 20-32. [Google Scholar] [CrossRef]
|
|
[11]
|
Mueller, M.W. and D’Andrea, R. (2014) Stability and Control of a Quadrocopter despite the Complete Loss of One, Two, or Three Propellers. 2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, 31 May-07 June 2014. [Google Scholar] [CrossRef]
|
|
[12]
|
Byrnes, C.I. and Isidori, A. (2003) Nonlinear Control Systems. Lecture Notes in Control & Information Sciences, 242, 408. [Google Scholar] [CrossRef]
|
|
[13]
|
Khalil, H.K. (2002) Output Regulation of Uncertain Nonlinear Systems: C.I. Byrnes, F.D. Priscoli, and A. Isidori, Copyright 1997, Birkhäuser, Boston. Automatica, 38, 1091-1093. [Google Scholar] [CrossRef]
|
|
[14]
|
田聪聪. 基于直接参数化方法的高超声速飞行器姿态控制[D]: [硕士学位论文]. 哈尔滨: 哈尔滨工业大学, 2017.[CrossRef]
|