微系统用高导热绝缘相变材料的制备与性能研究
Preparation and Properties Study of High Thermal Conductivity Insulating Phase Change Materials for Microsystems
DOI: 10.12677/JAPC.2024.131005, PDF,   
作者: 严英占, 彭志龙:中国电子科技集团公司信息科学研究院,北京;陈显才:中国电子科技集团公司第二十九研究所,四川 成都;王执乾, 范晋锋, 吴点宇:中国电子科技集团公司第三十三研究所,山西 太原
关键词: 高导热绝缘复合相变材料High Thermal Conductivity Insulation Composite Phase Change Material
摘要: 针对微系统发热量的热流密度已超过5 × 105 W/m2,造成功率芯片热流密度大、阵列芯片间温度差异大、温度波动大等问题,本文采用低温冷冻法在多孔氮化铝中填充正二十二烷制备复合相变材料。DSC测试表明相变温度在54℃左右,相变潜热在178 J/g左右,具有较高的相变温度、相变潜热,可以为微系统电子元器件的整体散热提供解决方案。
Abstract: Since the heat flux of the microsystem has exceeded 5 × 105 W/m2, in order to solve the problems of high heat flux of the microsystem power chip, large temperature fluctuation and large temperature difference between the array chips, this paper adopts the cryogenic freezing method and fills n-docosane with porous aluminum nitride to prepare composite phase change materials. The DSC test shows that the phase transition temperature is about 54˚C, and the latent heat of phase transition is about 178 J/g, which has a high phase transition temperature and latent heat, and can provide a solution for the overall heat dissipation of the electronic components of the microsystem.
文章引用:严英占, 彭志龙, 陈显才, 王执乾, 范晋锋, 吴点宇. 微系统用高导热绝缘相变材料的制备与性能研究[J]. 物理化学进展, 2024, 13(1): 35-40. https://doi.org/10.12677/JAPC.2024.131005

参考文献

[1] 何天白. 功能高分子与新技术[M]. 北京: 化学工业出版社, 2001.
[2] 余怀强, 等. 微系统热管理技术的新发展[J]. 压电与声光, 2018(6): 40-46.
[3] Cheng, Y.F., Yang, W.B., Wei, X., et al. (2013) Study on Preparation and Properties of Thermally Conductive and Insulating PA Composites. Journal of Functional Materials, 44, 748-751.
[4] Biswas, D.R. (2003) Thermal Energy Storage Using Sodium Sulfate Decahydrate and Water. Solar Energy, 19, 99-100. [Google Scholar] [CrossRef
[5] Wang, Z.J., Zhang, J., Xu, S.H., et al. (2007) 1D Partially Oxidized Porous Silicon Photonic Crystal Reflector for Mid-Infrared Application. Journal of Physics D: Applied Physics, 40, 4482-4484. [Google Scholar] [CrossRef
[6] 王韬, 安春全, 王杰军, 等. 一种基于微流道散热器的自适应散热微系统[J]. 电子元件与材料, 2020, 39(6): 55-60.