纳秒脉冲激光除漆过程中作用机制的仿真研究
Simulation Study of the Mechanism of Action in the Process of Nanosecond Pulsed Laser Paint Removal
摘要: 本文利用有限元法建立了纳秒脉冲激光去除铝合金表面漆层的烧蚀模型和应力模型，通过改变重频率得到不同的温度和应力变化趋势，从而分析了激光作用时间为1 s、激光能量密度为20 J/cm2时的脱漆机理。仿真结果表明，当脉冲重复频率6 Hz以下时应力作用去除漆层占主导地位；脉冲重复频率6 Hz及以上时，烧蚀作用去除漆层占主导地位。为激光清洗技术提供了可靠的理论支撑和一定的工艺参数。
Abstract: In this paper, the ablation model and stress model of nanosecond pulse laser to remove the paint layer on the surface of aluminum alloy is established by using the finite element method, and different temperature and stress trends are obtained by changing the repetition frequency, to analyze the paint stripping mechanism when the laser action time is 1 s and the laser energy density is 20 J/cm2. The simulation results show that when the pulse repetition frequency is less than 6 Hz, the stress action is dominant to remove the paint layer. At a pulse repetition rate of 6 Hz and above, ablation removes the paint layer dominantly. It provides reliable theoretical support and certain process parameters for laser cleaning technology.
文章引用：毛洪涛, 蔡继兴. 纳秒脉冲激光除漆过程中作用机制的仿真研究[J]. 应用物理, 2024, 14(4): 190-196. https://doi.org/10.12677/app.2024.144023

参考文献

[1] Dursun, T. and Soutis, C. (2014) Recent Developments in Advanced Aircraft Aluminium Alloys. Materials & Design (1980-2015), 56, 862-871. [Google Scholar] [CrossRef] 
[2] Georgantzia, E., Gkantou, M. and Kamaris, G.S. (2021) Aluminium Alloys as Structural Material: A Review of Research. Engineering Structures, 227, Article ID: 111372. [Google Scholar] [CrossRef] 
[3] Imran, M. and Khan, A.R.A. (2019) Characterization of Al-7075 Metal Matrix Composites: A Review. Journal of Materials Research and Technology, 8, 3347-3356. [Google Scholar] [CrossRef] 
[4] D’Addona, D.M., Genna, S., Giordano, A., et al. (2015) Laser Ablation of Primer during the Welding Process of Iron Plate for Shipbuilding Industry. Procedia CIRP, 33, 464-469. [Google Scholar] [CrossRef] 
[5] Mistry, A.S.L. (2014) The Effects of Short Pulse Laser Surface Cleaning on Porosity Formation and Reduction in Laser Welding of Aluminium Alloy for Automotive Component Manufacture. Optics & Laser Technology, 64, 162-171. [Google Scholar] [CrossRef] 
[6] Turner, M., Crouse, P. and Li, L. (2006) Comparison of Mechanisms and Effects of Nd:YAG and CO2 Laser Cleaning of Titanium Alloys. Applied Surface Science, 252, 4792-4797. [Google Scholar] [CrossRef] 
[7] Lutey, A.H.A. (2013) An Improved Model for Nanosecond Pulsed Laser Ablation of Metals. Journal of Applied Physics, 114, 647-676. [Google Scholar] [CrossRef] 
[8] Zhu, H., Caceres, C.H., Zhang, X., et al. (2007) Investigation of Streaking Defects on Aluminium Extrusions. PRICM 6, Jeju Island, 5-9 November 2007.
[9] Xu, J.W., Wu, C.W, Zhang, X., et al. (2019) Influence of Parameters of a Laser Cleaning Soil Rust Layer on the Surface of Ceramic Artifacts. Applied Optics, 58, 2725-2730. [Google Scholar] [CrossRef] 
[10] Zhang, D., Xu, J., Li, Z., et al. (2022) Removal Mechanisms of Nanosecond Pulsed Laser Cleaning of Blue and Red Polyurethane Paint. Applied Physics A, 128, 1-14. [Google Scholar] [CrossRef] 
[11] Ye, Y., Yuan, X., Xiang, X., et al. (2012) Laser Cleaning of Particle and Grease Contaminations on the Surface of Optics. Optik - International Journal for Light and Electron Optics, 123, 1056-1060. [Google Scholar] [CrossRef] 
[12] Yenice, H. and Dünya, H. (2007) Mechanical Cleaning of Calcite Scaling with Rotating Control Head Preventer in a Geothermal Well. Energy Exploration & Exploitation, 25, 451-465. [Google Scholar] [CrossRef] 
[13] Kishore, P.S., Kumar, R. and Venkata, N.V. (2018) Comparative Study of Mechanical and Chemical Methods for Surface Cleaning of a Marine Shellandtube Heat Exchanger. Heat Transfer-Asian Research, 47, 520-530.
[14] Tam, A.C., Park, H.K., Grigoropoulos, C.P. (1998) Laser Cleaning of Surface Contaminants. Applied Surface Science, 127-129, 721-725. [Google Scholar] [CrossRef] 
[15] Guo, L., Li, Y., Geng, S., et al. (2022) Numerical and Experimental Analysis for Morphology Evolution of 6061 Aluminum Alloy during Nanosecond Pulsed Laser Cleaning. Surface and Coatings Technology, 432, Article ID: 128056. [Google Scholar] [CrossRef] 
[16] Li, Z.C., Zhang, D.H., et al. (2021) Removal Mechanism of Surface Cleaning on TA15 Titanium Alloy Using Nanosecond Pulsed Laser. Optics & Laser Technology, 139, Article ID: 106998. [Google Scholar] [CrossRef] 

为你推荐