间断环面槽翅片管换热器传热与阻力性能数值模拟研究
Numerical Simulation Study on Heat Transfer and Resistance Performance of Intermittent Annular Groove Finned Tube Heat Exchanger
DOI: 10.12677/mos.2024.133312, PDF,   
作者: 吕伟旋, 黄洪锋：上海理工大学能源与动力工程学院，上海市动力工程多相流动与传热重点实验室，上海
关键词: 翅片管换热器；间断环面槽翅片；数值模拟；传热性能；阻力性能；Finned Tube Heat Exchanger； Intermittent Annular Groove Fins； Numerical Simulation； Heat Transfer Performance； Resistance Performance
摘要: 通过模化试验与数值模拟的方法，来研究翅片间距Pf、开槽位置(上游环面槽周向中线半径Rs、下游环面槽周向中线半径Rx)以及开槽角度(环面槽的弧角θ)对间断环面槽翅片的传热与阻力性能的影响规律。研究结果表明：Re = 1000~8200时，翅片侧Nu随着Re的增大而增大；Eu随着Re的增大而减小；翅片侧Nu随着Pf的减小而增大；Eu随着Pf的增大而减小；翅片侧Nu随着Rs的增大而增大；Eu随着Rs的增大而增大；翅片侧Nu随着Rx的减小而减小；Eu随着Rx的减小而减小；翅片侧Nu随着θ的增大而增大；在Re较低时，Eu随着θ的增大而增大；在Re较高时，θ对换热器翅片侧阻力的影响不大。
Abstract: The effects of fin spacing (Pf), upper torus groove radius (Rs), lower torus groove radius (Rx), and slot angle (θ) on heat transfer and resistance of discontinuous torus groove fins were studied by modeling test and numerical simulation. The results showed that when Re = 1000~8200, Nu on the fin side increased with the increase of Re. Eu decreases with the increase of Re. The Nu on the fin side increases with the decrease of Pf. Eu decreases with the increase of Pf. The Nu on the fin side increased with the increase of Rs. Eu increases with the increase of Rs. Nu on the fin side decreased with the decrease of Rx. Eu decreases with the decrease of Rx; The Nu on the fin side increases with the increase of θ. When Re is low, Eu increases with the increase of θ. When Re is high, θ has little effect on the side resistance of heat exchanger fins.
文章引用：吕伟旋, 黄洪锋. 间断环面槽翅片管换热器传热与阻力性能数值模拟研究[J]. 建模与仿真, 2024, 13(3): 3424-3436. https://doi.org/10.12677/mos.2024.133312

参考文献

[1] 金巍巍, 屈治国, 张超超, 等. 空调蒸发器用管翅式换热器开缝翅片的数值设计[J]. 工程热物理学报, 2006, 27(4): 688-690.
[2] 孟辉, 晋欣桥, 郭轶波. 开缝翅片管换热器换热和压降特性及其评价方法[J]. 上海交通大学学报, 2009(5): 766-771.
[3] 费继友, 田士博, 王枫, 等. 平直翅片管式换热器结构参数的优化[J]. 大连交通大学学报, 2018, 39(6): 40-44.
[4] 施兴兴, 袁益超. 单向开缝翅片管换热器传热与阻力特性试验研究[J]. 低温与超导, 2019, 47(7): 87-91.
[5] 施兴兴, 袁益超. 翅片结构对单向开缝翅片管换热器传热与阻力性能的影响[J]. 热能动力工程, 2020, 35(6): 150-157.
[6] Wang, C.C., Tao, W.H. and Chang, C.J. (1999) An Investigation of the Airside Performance of the Slit Fin-and-Tube Heat Exchangers. International Journal of Refrigeration, 22, 595-603. [Google Scholar] [CrossRef] 
[7] Du, Y.J. and Wang, C.C. (2000) An Experimental Study of the Airside Performance of the Superslit Fin-and-Tube Heat Exchangers. International Journal of Heat and Mass Transfer, 43, 4475-4482. [Google Scholar] [CrossRef] 
[8] 袁益超, 廖飞页, 赵存江, 等. 双向开缝翅片管换热器传热与阻力特性试验研究[J]. 热科学与技术, 2014, 13(3): 235-239.
[9] 刘逸, 陈培强, 陈鑫, 等. 组合式翅片管换热器传热与阻力性能影响因素研究[J]. 节能技术, 2021, 39(6): 498-504.
[10] 熊伟, 罗毓珊, 王海军, 等. 二种开缝翅片特性的试验及数值模拟比较研究[J]. 化学工程, 2009, 37(1): 11-14.
[11] 李猛, 袁益超. 翅片参数对开缝翅片管换热器换热与阻力性能的影响[J]. 热能动力工程, 2020, 35(4): 153-162.
[12] 张薇, 杜小泽, 杨立军. 空冷散热器开缝翅片管束外空气流动传热特性研究[J]. 山东农业大学学报(自然科学版), 2016, 47(3): 452-455.
[13] 姜国栋. 间断环面槽肋片管束的传热和流动阻力[J]. 化工学报, 2000(5): 604-608.
[14] Lin, Z.M., Wang, L.B. and Zhang, Y.H. (2014) Numerical Study on Heat Transfer Enhancement of Circular Tube Bank Fin Heat Exchanger with Interrupted Annular Groove Fin. Applied Thermal Engineering, 73, 1465-1476. [Google Scholar] [CrossRef] 
[15] 曹泷, 王良璧. 圆管非对称间断环面槽换热器翅片传热特性的数值研究[J]. 甘肃科学学报, 2015, 27(3): 101-105.
[16] Wang, F., He, Y. and Tang, S. (2017) Parameter Study on the Fouling Characteristics of the H-Type Finned Tube Heat Exchangers. International Journal of Heat and Mass Transfer, 112, 367-378. [Google Scholar] [CrossRef] 
[17] Liu, X., Wang, M. and Liu, H. (2021) Numerical Analysis on Heat Transfer Enhancement of Wavy Fin-Tube Heat Exchangers for Air-Conditioning Applications. Applied Thermal Engineering, 199, Article ID: 117597. [Google Scholar] [CrossRef] 

为你推荐