PROTOS 2C卷烟机组SE胶水桶表层防凝结的设计及应用

Design and Application of Anti-Condensation on the Surface of SE Glue Barrel of PROTOS 2C Cigarette Making Machine

摘要: PROTOS 2C卷烟机通过压缩空气向胶水桶内加压以保证连续不断向喷胶嘴供胶，但容易出现胶水桶内表层胶水产生胶皮和凝结成块，堵塞胶水管路及喷嘴的情况，针对这个问题，我们在继续使用原有压缩空气系统的情况下，在桶盖上原有安全阀位置处安装快插气管接头，接入或门型梭阀，使得压缩空气不向外界排出，不带走胶水水分，问题得到解决。目前已应用于卷包一车间10台PROTOS 2C卷接机组，应用效果良好。

Abstract: The PROTOS 2C cigarette machine pressurizes the glue bucket with compressed air to ensure continuous supply of glue to the spray nozzle. However, it is prone to the occurrence of glue on the surface of the glue bucket forming rubber skin and clumping, blocking the glue pipeline and nozzle. In response to this problem, we have installed a quick insertion air pipe joint at the original safety valve position on the bucket cover while continuing to use the original compressed air system, and connected it to a door type shuttle valve to prevent compressed air from being discharged to the outside and not taking away glue moisture, thus solving the problem. At present, it has been applied to 10 PROTOS 2C winding and splicing units in the first packaging workshop, and the application effect is good.