文章引用说明 更多>> (返回到该文章)

Sommerfeld, H.N. (1998) Modeling and numerical calculation of dilute-phase pneumatic conveying in pipe systems. Powder Technology, 99, 90-101.

被以下文章引用:

  • 标题: 散体相气力输送的入口数值分析Digital Simulation of Inlet Structure of Pneumatic Transport

    作者: 张永, 孙利民

    关键字: 气力输送, 有限元仿真, 入口结构, 欧拉双流体模型Pneumatic Conveying; Fluent Simulation; Inlet Structure; Euler Two-Fluid Model

    期刊名称: 《International Journal of Mechanics Research》, Vol.2 No.4, 2014-04-21

    摘要: 针对气力输送中由于气力入口和散体入口存在夹角所造成的能耗高问题,提出了一种气力入口和散体入口0度角即平行的入口结构并对其可行性进行仿真得出以下结论:1) 可以采用气力入口和散体入口平行的入口结构依靠负压将沙粒吸入管道,进而借助气动力的推力推动散体在管道中输送;2) 当气动力入口深入管道一定深度可以增大散体入口区域负压面积及数值,更有利于对散体的吸附;3) 用仿真的手段说明沙粒进入管道的初速度以及加速度对沙粒在管道中的最终速度影响不大。 Two steps of simulation of gas-solid concurrent inlet structure of pneumatic transmission are done: 1) the distribution of gas pressure and velocity in the inlet belt by the condition of existing gas power only; 2) the emulation flow of sand near the region of inlet. So we draw a conclusion: 1) The way of adopting gas-solid concurrent structure to transport particles in duct is feasible; 2) The structure of gas inlet being deeper than particle inlet in tunnel could drag particle better; 3) It is stated again by simulation that the initial velocity and acceleration of particle into the tunnel has a weak impact on the terminal velocity of particle.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享