文章引用说明 更多>> (返回到该文章)

Kuziak, R., Kawalla, R. and Waengler, S. (2008) Advanced High Strength Steels for Automotive Industry. Archives of Civil and Mechanical Engineering, 8, 103-117.
http://dx.doi.org/10.1016/S1644-9665(12)60197-6

被以下文章引用:

  • 标题: TRIP钢在高速应变率下动态响应机制研究The Study on Dynamic Response Mechanism of TRIP Steel in the Highest Strain Rate

    作者: 陈巍, 胡士廉, 高永亮, 杨阳, 孙国进, 周宏凯, 李经纬

    关键字: 应变率, 残余奥氏体, 动态强度Strain Rate, Residual Austenite, Dynamic Strength

    期刊名称: 《Material Sciences》, Vol.5 No.6, 2015-11-12

    摘要: 本文分析了TRIP钢在应变率1~4000 S−1之间动态力学行为,以及材料在高变形速率下的相变过程和机理,应变率1500~2500 S−1之间,是TRIP效应发生的明显阶段,在此应变率下TRIP钢充分的发挥了的应变强化、应变硬化、相变强化效应,TRIP钢在2000 S−1应变率下动态屈服强度明显、动态强塑积最高,具有较高的吸能效应。经过研究分析,不同应变率下残余奥氏体的转变量和形态机理是影响动态强度的主要因素之一。 In this paper, the dynamic mechanics property of TRIP steel in the strain rate range of 1 - 4000 S−1 was carried out. The material transformation process and mechanism in the high strain rate were analyzed. The TRIP effect was obvious in the strain rate range of 1500 - 2500 S−1. The excellent strain strengthening, strain hardening, and transformation strengthening were shown in the strain rate range of 1500 - 2500 S−1. TRIP steel has high dynamic yield strength, dynamic response and energy-absorbing capacity under the strain rate of 2000 S−1. The transformed amount and behavior of residual austenite affect the dynamic strength in different strain rates.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享