pH值对304与316不锈钢在高温高压水中腐蚀行为的影响研究
Effect of pH on Corrosion Behavior of 304 and 316 Stainless Steel in High Temperature Pressurized Water
DOI: 10.12677/nst.2025.131006, PDF,    科研立项经费支持
作者: 陈忠村*, 卫小艳, 王成杰, 刘虓瀚, 金 鑫, 厉井钢：中广核研究院有限公司，广东 深圳
关键词: 304不锈钢；316不锈钢；pH值；腐蚀释放；304 Stainless Steel； 316 Stainless Steel； pH Value； Corrosion Product Release
摘要: 本文以304不锈钢与316不锈钢为研究对象，通过动态腐蚀试验研究了pH值对两种不锈钢材料在高温高压水环境中腐蚀行为的影响规律。SEM-EDS分析证实两种不锈钢材料表面均形成了Fe、Cr、Ni为主的颗粒氧化物，然后采用XPS获得了不锈钢表面氧化膜中主要元素的化学形态与质量占比。腐蚀动力学分析结果表明两种不锈钢材料的腐蚀速率与释放速率均随浸泡时间呈现先增加后趋于平缓的趋势，此外，6.8~7.4范围内的pH值变化对两种不锈钢材料的腐蚀释放行为影响较小。
Abstract: The effect of pH value on the corrosion behavior for 304 and 316 stainless steels in high-temperature and high pressurized water was investigated through corrosion experiment. The SEM-EDS results confirm the existence of metal oxide particles (Ni, Fe, Cr) on 304 and 316 stainless steel surfaces. The chemical component and speciation in oxide film were obtained by means of XPS analysis. The corrosion kinetics curves reveal that the corrosion rate and release rate firstly increase over exposing time, then tend to moderate. Furthermore, the corrosion release behaviors of 304 and 316 stainless steels are little influenced by the pH varied between 6.8 and 7.4.
文章引用：陈忠村, 卫小艳, 王成杰, 刘虓瀚, 金鑫, 厉井钢. pH值对304与316不锈钢在高温高压水中腐蚀行为的影响研究[J]. 核科学与技术, 2025, 13(1): 49-57. https://doi.org/10.12677/nst.2025.131006

参考文献

[1] 云桂春, 成徐州. 压水反应堆水化学[M]. 哈尔滨: 哈尔滨工程大学出版社, 2009.
[2] Secker, J.R., Shatilla, Y.A., Johansen, B.J., et al. (2001) Present Status of Reactor Physics in the United States and Japan-III. 4. Methods for Evaluating Crud Induced Axial Power Shift. Transactions of the American Nuclear Society, 84, 62-64.
[3] Salko, R., Slattery, S., Lange, T., et al. (2018) Development of Preliminary VERA-CS Crud Induced Localized Corrosion Modeling Capability. Oak Ridge National Laboratory.
[4] Rocher, A., Bretelle, J.L. and Berger, M. (2004) Impact of Main Radiological Pollutants on Contamination Risks (ALARA). Optimisation of Physico Chemical Environment and Retention Techniques during Operation and Shutdown. European Workshop on Occupational Exposure Management at NPPs, Information System on Occupational Exposure, Lyon, 24-26 March 2004, 30-36.
[5] Huang, J., Wu, X. and Han, E. (2009) Influence of pH on Electrochemical Properties of Passive Films Formed on Alloy 690 in High Temperature Aqueous Environments. Corrosion Science, 51, 2976-2982. [Google Scholar] [CrossRef] 
[6] Yeh, T., Tsai, C. and Cheng, Y. (2005) The Influence of Dissolved Hydrogen on the Corrosion of Type 304 Stainless Steels Treated with Inhibitive Chemicals in High Temperature Pure Water. Journal of Nuclear Science and Technology, 42, 462-469. [Google Scholar] [CrossRef] 
[7] Zhang, Z., Wang, J., Han, E. and Ke, W. (2011) Influence of Dissolved Oxygen on Oxide Films of Alloy 690TT with Different Surface Status in Simulated Primary Water. Corrosion Science, 53, 3623-3635. [Google Scholar] [CrossRef] 
[8] 董超芳, 关矞心, 程学群, 等. pH值对高温高压水中304 L不锈钢应力腐蚀开裂的影响[J]. 工程科学学报, 2010, 32(12): 1569-1573.
[9] Liu, X., Han, E. and Wu, X. (2014) Effects of pH Value on Characteristics of Oxide Films on 316 L Stainless Steel in Zn-Injected Borated and Lithiated High Temperature Water. Corrosion Science, 78, 200-207. [Google Scholar] [CrossRef] 
[10] Wang, J., Wang, J., Ming, H., Zhang, Z. and Han, E. (2017) Effect of Ph on Corrosion Behavior of 316 L Stainless Steel in Hydrogenated High Temperature Water. Materials and Corrosion, 69, 580-589. [Google Scholar] [CrossRef] 
[11] 孟新静, 金志浩, 葛红花. 高氯介质中pH对316 L不锈钢和Q235碳钢腐蚀行为的影响[J]. 腐蚀与防护, 2014, 35(9): 866-870.
[12] 张晖, 李成涛, 宋利君, 等. pH对316 L不锈钢电化学性能的影响[J]. 腐蚀与防护, 2013, 34(7): 593-596.
[13] Lynch, N., Gregorich, C. and McElrath, C. (2018) PWR Fleet Chemistry Performance: EPRI PWR Chemistry Monitoring and Assessment Status. International Conference on Water Chemistry in Nuclear Reactor Systems, San Francisco, 9-14 September 2018, 1-15.
[14] 工业和信息化部. 金属材料实验室均匀腐蚀全浸试验方法[S]. 北京: 机械工业仪器仪表综合技术经济研究所, 2000.
[15] 中国钢铁工业协会. 金属和合金的腐蚀基本术语和定义[S]. 北京: 中国标准出版社, 2001.
[16] American Society for Testing and Materials (2004) Standard Practice for Laboratory Immersion Corrosion Testing of Metals.
[17] Hanbury, R.D. and Was, G.S. (2019) Oxide Growth and Dissolution on 316 L Stainless Steel during Irradiation in High Temperature Water. Corrosion Science, 157, 305-311. [Google Scholar] [CrossRef]