连续管钻井循环压耗的计算
The Calculation of Circulating Pressure Loss in Coiled-tubing Drilling
摘要: 以辽河油田某区块作为研究对象，以该区块的地质情况、连续管钻机的性能参数等作为计算依据，对连续管钻井中各段压耗包括连续管盘管压耗、连续管直管压耗、环空压耗以及总循环压耗进行了相应的计算，重点探讨了钻井液流量Q，稠度系数K以及流性指数n对连续管循环压耗的影响。根据计算结果，结合实践经验，初步确定了连续管钻井液的流变性能参数。理论计算结果表明，对于水基无固相钻井液而言，Q值选择在0.01 m3/s左右, n值选择在0.4~0.5，K值选择在0.7~1.0 Pa∙sn较为合适。这些计算的理论分析可为连续管钻井液的设计提供一定的理论依据。
Abstract: A block of Liaohe Oilfield was taken as research object, based on geological condition of the block and performance parameter of coiled-tubing drilling rig, the pressure loss of different sections was calculated in coiled-tubing drilling(CT) including pressure loss of CT twisting in reel, downhole CT, annulus and total circulating. Especially, the effect of some important factors on total circulating pressure loss was discussed such as flow rate Q, consistency index K and rheological index n. Rheological properties parameter for coiled drilling fluid was determined by combining calculation results and practical experience. The calculation results show that it was desirable that Q is selected at 0.01 m3/s, n is at 0.4-0.5 and K is at 0.7-1.0 Pa∙sn in the water-based solid-free drilling fluid. Certain theoretical basis is provided for the design of fluids used in coiled-tubing drilling.
文章引用：米远祝, 罗跃, 黄志明. 连续管钻井循环压耗的计算[J]. 石油天然气学报, 2017, 39(6): 67-78. https://doi.org/10.12677/JOGT.2017.396100

参考文献

[1] Ian, W.C. and Gu, H. (1996) Hydraulics Design in Coiled Tubing Drilling. SPE36349.
[2] McCann, R.C. and Islas, C.G. (1996) Frictional Pressure Loss during Turbulent Flow in Coiled Tubing. SPE36345. [Google Scholar] [CrossRef] 
[3] Azouz, I., Shah, S.N., Vinod, P.S., et al. (1998) Experimental Investigation of Frictional Pressure Losses in Coiled Tubing. Society of Petroleum Engineers Production & Facilities, 13, 91-96. [Google Scholar] [CrossRef] 
[4] Rao, B.N. (2002) Friction Factor for Turbulent Flow of Non-Newtonian Fluid in Coiled Tubing. SPE74847. [Google Scholar] [CrossRef] 
[5] Zhou, Y. and Shah, S.N. (2006) New Friction-Factor Correlations for Non-Newtonian Fluid Flow in Coiled Tubing. SPE77960. [Google Scholar] [CrossRef] 
[6] Bailey, M.B. and Rosine, R.S. (2009) Comparison of Computional Fluid Dynamics of Erosion in Coiled Tubing on Reel-To-Injector Flow Area. SPE121171.
[7] Medjani, B. and Shah, S.N. (2000) A New Approach for Predicting Frictional Pressure Losses of Non-Newtonian Fluid in Coiled Tubing. SPE60319. [Google Scholar] [CrossRef] 
[8] Willingham, J.D. and Shah, S.N. (2000) Friction Pressures of Newtonian and Non-Newtonian Fluids in Straight and Reeled Coiled Tubing. SPE60719. [Google Scholar] [CrossRef] 
[9] Shah, S.N. and Zhou, Y. (2001) An Experimental Study of the Effects of Drilling Solids on Frictional Pressure Losses in Coiled Tubing. SPE67191. [Google Scholar] [CrossRef] 
[10] Shah, S., Zhou, Y., Bailey, M., et al. (2009) Correlations to Predict Frictional Pressure Loss of Hydraulic Fracturing Slurry in Coiled Tubing. SPE104253. [Google Scholar] [CrossRef] 
[11] Zhou, Y.X. (2006) Theoretical and Experimental Studies of Power-Law Fluid Flow in Coiled Tubing. The University of Oklahoma, Oklahoma.
[12] Hou, X.J., Zheng, H.K. and Zhao, J. (2014) Analysis of Circulating System Frictional Pressure Loss in Microhole Drilling with Coiled Tubing. The Open Petroleum Engineering Journal, 7, 22-28.
[13] Dean, W.R. (1927) Note on the Motion of Fluid in a Curved Pipe. Philosophical Magazine, 4, 208-223. [Google Scholar] [CrossRef] 
[14] Dean, W.R. (1928) Fluid Motion in a Curved Channel. Proceedings of the Royal Society of London: Series A. Containing Papers of a Mathematical and Physical Character, 121, 402-420. [Google Scholar] [CrossRef] 
[15] Hou, X.J., Gao, D.L. and Shen, Z.H. (2013) An Analysis of the Flow Resistance in Coiled Tubing Wound around a Reel, in Microhole Drilling. CMES-Computer Modeling in Engineering and Sciences, 89, 97-109.
[16] 郭晓乐, 龙芝辉, 齐成伟. 连续管钻小井眼水平井水力学分析[J]. 科学技术与工程, 2013, 13(26): 7781-7786.
[17] Wright, T. R. and Sas-Jaworsky II Jr, A. (2005) Coiled tubing Handbook. 4th Edition. Gulf Publishing Company, Houston.
[18] Zhou, Y. and Shah, S.N. (2002) Non-Newtonian Fluid Flow in Coiled Tubing: Theoretical Analysis and Experimental Verification. SPE77708. [Google Scholar] [CrossRef] 
[19] Jain, S., Singhal, N. and Shah, S.N. (2004) Effect of Coiled Tubing Curvature on Friction Pressure Loss of Newtonian and Non-Newtonian Fluids-Experimental and Simulation Study. SPE90558. [Google Scholar] [CrossRef]