材料形变纳米化研究现状与展望
Review of Development and Prospect of Deformation and Nanocrystallization for Materials
DOI: 10.12677/MS.2018.86082, PDF,   
作者: 黄传玺：临沂市中小企业服务中心，山东 临沂；王亚萍, 孙康宁：山东大学材料科学与工程学院，山东 济南
关键词: 形变纳米化；金属材料；大块材料纳米化；表面纳米化；Deformation Nanocrystallization； Metallic Nanocrystallization； Bulk Material Nanocrystallization； Surface Nanocrystallization
摘要: 本文较系统的介绍了金属材料形变纳米化发展现状，包括大块材料形变纳米化和材料表面的形变纳米化。并阐述了目前各种形变纳米化技术，以及纳米化后材料的组织、结构、性能的变化及用途。最后对材料的形变纳米化技术进行了展望。
Abstract: This article systematically introduces the development status of nanocrystallization of metallic materials’ deformation，including nanocrystallization of the bulk material and nanocrystallization of material’s surface deformation. Various technologies of deformation nanoscale are presented in the study. Furthermore, structure changes, properties and applications of materials after being nanosized are also introduced. Finally, we propose several prospects for the technologies of nanocrystallization of materials’ deformation.
文章引用：黄传玺, 王亚萍, 孙康宁. 材料形变纳米化研究现状与展望[J]. 材料科学, 2018, 8(6): 694-702. https://doi.org/10.12677/MS.2018.86082

参考文献

[1] Valiev, R.Z., Islamgaliev, R.K., Kuzmina, N.F., et al. (1998) Strengthening and Grain Refinement in an Al-6061 Metal Matrix Composite through Intense Plastic Straining. Scripta Materialia, 40, 117-122.
[Google Scholar] [CrossRef] 
[2] Gleiter, H. (1989) Nanocrystalline Materials. Progress in Materials Science, 33, 223-315.
[Google Scholar] [CrossRef] 
[3] 肖纪美. 对纳米晶体材料的思考[J]. 材料科学与工程学报, 2001, 19(3): 10-14.
[4] 王素梅, 孙康宁, 毕见强. 大塑性变形法制备块体纳米材料[J]. 金属热处理, 2003, 28(5): 43-45.
[5] Fan, Z., Jiang, H., Sun, X., et al. (2009) Microstructures and Mechanical Deformation Behaviors of Ultrafine-Grained Commercial Pure (Grade 3) Ti Processed by Two-Step Severe Plastic Deformation. Materials Science & Engineering A, 527, 45-51.
[Google Scholar] [CrossRef] 
[6] Li, Z., Fu, L., Fu, B., et al. (2012) Effects of Annealing on Microstructure and Mechanical Properties of Nano-Grained Titanium Produced by Combination of Asymmetric and Symmetric Rolling. Materials Science & Engineering A, 558, 309-318.
[Google Scholar] [CrossRef] 
[7] Lu, K. and Lu, J. (1999) Surface Nanocrystallization (SNC) of Metallic Materials-Presentation of the Concept behind a New Approach. Journal of Materials Science & Technology, 15, 193-197.
[8] Azadmanjiri, J., Berndt, C.C., Kapoor, A., et al. (2015) Development of Surface Nano-Crystallization in Alloys by Surface Mechanical Attrition Treatment (SMAT). Critical Reviews in Solid State & Material Sciences, 40, 164-181.
[Google Scholar] [CrossRef] 
[9] 王积森, 张国松, 孙金全, 等. 一种金属材料表面纳米化方法[P]. 中国专利,. CN1696353A. 2005-05-16.
[10] Wang, Z.B., Tao, N.R., Li, S., et al. (2003) Effect of Surface Nanocrystallization on Friction and Wear Properties in Low Carbon Steel. Materials Science & Engineering A, 352, 144-149.
[Google Scholar] [CrossRef] 
[11] Yong, X.P., Liu, G., Lu, K., et al. (2003) Characterization and Properties of Nanostructured Surface Layer in a Low Carbon Steel Subjected to Surface Mechanical Attrition. Journal of Materials Science & Technology, 19, 1-4.
[12] Zhang, H.W., Hei, Z.K., Liu, G., et al. (2003) Formation of Nanostructured Surface Layer on AISI 304 Stainless Steel by Means of Surface Mechanical Attrition Treatment. Acta Materialia, 51, 1871-1881.
[Google Scholar] [CrossRef] 
[13] 杨晓华, 兑卫真, 刘刚. 表面机械研磨处理对316L不锈钢组织和性能的影响[J]. 材料热处理学报, 2007, 28(2): 118-121.
[14] Thangaraj, B., Kulandaivelu, R., Min, H.L., et al. (2015) A Facile Method to Modify the Characteristics and Corrosion Behaviour of 304 Stainless Steel by Surface Nanostructuring towards Biomedical Applications. ACS Applied Materials & Interfaces, 7, 17731-17747.
[Google Scholar] [CrossRef] [PubMed]
[15] Kumar, S.A., Raman, S.G.S., Narayanan, T.S.N.S., et al. (2013) Influence of Counterbody Material on Fretting Wear Behaviour of Surface Mechanical Attrition Treated Ti-6Al-4V. Tribology International, 57, 107-114.
[16] 张淑兰, 陈怀宁, 林泉洪, 等. 工业纯钛的表面纳米化及其机制[J]. 有色金属工程, 2003(4): 5-8.
[17] Wen, M., Liu, G., Gu, J.F., et al. (2008) The Tensile Properties of Titanium Processed by Surface Mechanical Attrition Treatment. Surface & Coatings Technology, 202, 4728-4733.
[Google Scholar] [CrossRef] 
[18] 毕海香. 纯铜表面纳米化及其扩散性能研究[D]: [硕士学术论文]. 太原: 太原理工大学, 2008.
[19] Wen, L., Yuan, Y., Wang, Y., et al. (2015) Effect of Nanocrystalline Surface and Iron-Containing Layer Obtained by SMAT on Tribological Properties of 2024 Al Alloy. Rare Metal Materials & Engineering, 44, 1320-1325.
[Google Scholar] [CrossRef] 
[20] Wu, X., Tao, N., Hong, Y., et al. (2002) Microstructure and Evolution of Mechanically-Induced Ultrafine Grain in Surface Layer of AL-Alloy Subjected to USSP. Acta Materialia, 50, 2075-2084.
[Google Scholar] [CrossRef] 
[21] Wen, L., Wang, Y., Zhou, Y., et al. (2011) Microstructure and Corrosion Resistance of Modified 2024 Al Alloy Using Surface Mechanical Attrition Treatment Combined with Microarc Oxidation Process. Corrosion Science, 53, 473-480.
[Google Scholar] [CrossRef] 
[22] Liu, G., Lu, J. and Lu, K. (2000) Surface Nanocrystallization of 316L Stainless Steel Induced by Ultrasonic Shot Peening. Materials Science & Engineering A, 286, 91-95.
[Google Scholar] [CrossRef] 
[23] Chen, C.H., Ren, R.M., Zhao, X.J., et al. (2004) Surface Nanostructures in Commercial Pure Ti Induced by High Energy Shot Peening. Transactions of Nonferrous Metals So-ciety of China, 14, 215-218.
[24] Liu, G., Wang, S.C., Lou, X.F., et al. (2001) Low Carbon Steel with Nanostructured Surface Layer Induced by High-Energy Shot Peening. Scripta Materialia, 44, 1791-1795.
[25] Dai, K. and Shaw, L. (2008) Analysis of Fatigue Resistance Improvements via Surface Severe Plastic Deformation. International Journal of Fatigue, 30, 1398-1408.
[Google Scholar] [CrossRef] 
[26] Kameyama, Y. and Komotori, J. (2009) Effect of Micro Ploughing during Fine Particle Peening Process on the Microstructure of Metallic Materials. Journal of Materials Processing Tech, 209, 6146-6155.
[Google Scholar] [CrossRef] 
[27] 熊天英, 刘志文, 李智超, 等. 超音速微粒轰击金属表面纳米化新技术[J]. 材料导报, 2003, 17(3): 69-71.
[28] Wang, T., Yu, J. and Dong, B. (2005) Surface Nanocrystal-lization Induced by Shot Peening and Its Effect on Corrosion Resistance of 1Cr18Ni9Ti Stainless Steel. Surface & Coatings Technology, 200, 4777-4781.
[29] Wang, X.Y. and Li, D.Y. (2002) Mechanical and Electrochemical Behavior of Nanocrystalline Surface of 304 Stainless Steel. Electrochimica Acta, 47, 3939-3947.
[Google Scholar] [CrossRef] 
[30] Sato, M., Tsuji, N., Minamino, Y., et al. (2004) Formation of Nanocrystalline Surface Layers in Various Metallic Materials by Near Surface Severe Plastic Deformation. Science & Technology of Advanced Materials, 5, 145-152.
[Google Scholar] [CrossRef] 
[31] 王东坡, 宋宁霞, 王婷, 等. 纳米化处理超声金属表面[J]. 天津大学学报, 2007, 40(2): 228-233.
[32] Prokopenko, G.I. (2007) Ultrasonic Impact Peening for the Surface Properties’ Management. Journal of Sound & Vibration, 308, 855-866.
[33] Zhang, Y.S., Li, W.L., Wang, G., et al. (2012) Formation of Thick Nanocrystalline Surface Layer on Copper during Oscillating Sliding. Materials Letters, 68, 432-434.
[Google Scholar] [CrossRef] 
[34] Li, W.L., Tao, N.R. and Lu, K. (2008) Fabrication of a Gradient Nano-Micro-Structured Surface Layer on Bulk Copper by Means of a Surface Mechanical Grinding Treatment. Scripta Materialia, 59, 546-549.
[Google Scholar] [CrossRef] 
[35] 巴德玛, 马世宁. 机械加工法实现金属材料表面自身纳米化的研究进展[J]. 材料导报, 2006, 20(11): 92-95.
[36] Chen, X.H., Lu, J., Lu, L., et al. (2005) Tensile Properties of a Nanocrystalline 316L Austenitic Stainless Steel. Scripta Materialia, 52, 1039-1044.
[Google Scholar] [CrossRef] 

为你推荐