薄板声发射信号Lamb波模式的分析与验证
The Analysis and Verification of the Acoustic Emission Lamb Wave Mode in the Thin Plate
DOI: 10.12677/OJAV.2019.72006, PDF,    科研立项经费支持
作者: 胥保春*, 吴京秋, 程啟华, 刘 欣：南京工程学院工业中心，江苏 南京
关键词: 声发射；Lamb波；结构健康监测；Acoustic Emission； Lamb Wave； Structural Health Monitoring
摘要: 文章分析了薄板不同受力方向激发的声发射波速特点，接着说明了板内Lamb波低阶模式与之对应的关系。为了验证这种关系，以铝板与环氧玻璃纤维板为实验对象，利用板面断铅与断面断铅模拟垂直与平行方向的力产生声发射，实验结果与文中理论分析相符。实验表明文中分析的Lamb波低阶模态与不同方向力激发的声发射波形之间的关系，可以用于板结构健康监测。
Abstract: In this paper, the characteristics of acoustic emission wave velocity excited in different directions of force on thin plate are analyzed, and the relationship between the low-order modes of Lamb wave in plate and them is explained. In order to verify this relationship, aluminum plate and epoxy glass fiberplate are taken as experimental objects, and the vertical and parallel forces are simulated by using the lead breaking on surface and end of the plate. The acoustic emission analysis results are consistent with the theoretical analysis. The experimental results are consistent with the conclusions from the theoretical analysis in the text. The results show that the relationship between the low-order modes of Lamb wave and the acoustic emission waveforms excited by forces in different directions can be used for the structural health monitoring of plate.
文章引用：胥保春, 吴京秋, 程啟华, 刘欣. 薄板声发射信号Lamb波模式的分析与验证[J]. 声学与振动, 2019, 7(2): 59-65. https://doi.org/10.12677/OJAV.2019.72006

参考文献

[1] 李冬生, 欧进萍. 声发射技术在拱桥吊杆损伤监测中的应用[J]. 沈阳建筑大学学报(自然科学版), 2007, 23(1): 6-10.
[2] 朱永凯, 潘仁前, 陈盛票, 等. 基于声发射传感器阵列的风机叶片结构健康监测方法[J]. 无损检测, 2010, 32(10): 753-756.
[3] 朱波, 王成国. 声发射特性与材料断裂韧性相关性研究[J]. 物理学报, 2003, 52(8): 1960-1963.
[4] 朱振飞, 陈国庆, 肖宏跃, 等. 基于声发射多参量分析的岩桥裂纹扩展研究[J]. 岩石力学与工程学报, 2018(4), 909-918. http://kns.cnki.net/kcms/detail/42.1397.O3.20171219.2316.006.html
[5] Nardi, D., Lampani, L., Pasquali, M., et al. (2016) Detection of Low Velocity impact-Induced Delaminations in Composite Laminates Using Auto-Regressive Models. Composite Structures, 151, 108-113. [Google Scholar] [CrossRef] 
[6] Pérez, M., Gil, L. and Oller, S. (2014) Impact Damage Identification in Composite Laminates Using Vibration Testing. Composite Structures, 108, 267-276. [Google Scholar] [CrossRef] 
[7] Aymerich, F. and Staszewski, W.J. (2010) Impact Damage Detection in Composite Laminates Using Nonlinear Acoustics. Composites Part A: Applied Science and Manufacturing, 41, 1084-1092. [Google Scholar] [CrossRef] 
[8] Takeda, S., Aoki, Y., Ishikawa, T., et al. (2007) Structural Health Moni-toring of Composite Wing Structure during Durability Test. Composite Structures, 79, 134-138. [Google Scholar] [CrossRef] 
[9] Yuan, S.F., Liu, P.P. and Qiu, L. (2012) A miniaturized Composite Impact Monitor and Its Evaluation Research. Sensors and Actuators A: Physical, 184, 182-192. [Google Scholar] [CrossRef] 
[10] Liang, D., Yuan, S.F. and Liu, M.L. (2013) Distributed Coordination Algorithm for Impact Location of Preciseness and Real-Time on Composite Structures. Measurement, 46, 527-536. [Google Scholar] [CrossRef] 
[11] Qiu, L., Liu, B., Yuan, S.F., et al. (2016) Impact Imaging of Aircraft Composite Structure Based on a Model-Independent Spatial-Wavenumber Filterd. Ultrasonics, 64, 10-24. [Google Scholar] [CrossRef] [PubMed]
[12] Gorman, M.R. (1991) Plate Wave Acoustic Emission. JASA, 90, 358-364. [Google Scholar] [CrossRef] 
[13] 郑祥明, 赵玉珍, 史耀武. 兰姆波频散曲线的计算[J]. 无损检测, 2003, 25(3): 66-68.
[14] 耿荣生, 沈功田, 刘时风. 模态声发射基本理论[J]. 无损检测, 2002, 24(7): 302-306.

为你推荐