小型模块化反应堆非能动安全壳冷却系统设计概述
Design Overview on Passive Containment Cooling System of SMR
摘要: 安全壳是核电厂防止放射性物质泄漏的最后一道屏障，福岛核事故以来，非能动安全壳冷却系统的设计一直是先进核动力反应堆的研究重点。小型反应堆将当前先进的非能动设计与其一体化概念相结合，提出了新的设计理念。本文旨在总结国内外小型模块化反应堆非能动安全壳冷却系统的设计方案，通过不同方案之间的优劣对比，分别提出适合陆上小型堆和海上浮动堆非能动安全壳冷却的设计方案，为我国模块化小型反应堆正在进行的非能动安全壳冷却系统研究提供参考。
Abstract: Containment is the last barrier to prevent radioactive materials leaking from nuclear power plants. Since the Fukushima nuclear accident, the research of advanced nuclear power reactor has always been focusing on the design of passive containment cooling systems. The small modular reactor combines the advanced passive design with its integrated concept, and proposes new designing concepts. This paper aims to give a thorough introduction about the representative design of small modular reactor passive containment cooling system both in China and abroad. By comparing the advantages and disadvantages of different design, it also gives out optimized solutions for onshore small reactors and offshore floating nuclear power plant, which can be taken as reference for the research of small reactor passive containment cooling system currently studied.
文章引用：刘嘉维, 刘长亮, 朱京梅, 曲昌明, 孙超杰. 小型模块化反应堆非能动安全壳冷却系统设计概述[J]. 核科学与技术, 2019, 7(4): 123-132. https://doi.org/10.12677/NST.2019.74017

参考文献

[1] 李军, 刘长亮, 李晓明. 非能动安全壳冷却系统设计研究[J]. 核科学与工程, 2018, 38(4): 632-639.
[2] Carelli, M.D. and Westinghouse, F. (2015) Handbook of Small Modular Nuclear Reactors. Elsevier, Cambridge, MA.
[3] Kalra, V. (2017) CFD Validation and Scaling of Condensation Heat Transfer. Missouri University, Columbia, MO.
[4] Smith, M.C. and Wright, R.F. (2012) Westinghouse Small Modular Reactor Passive Safety System Response to Postulated Events. Proceedings of ICAPP, Chicago, IL, 24-28 June 2012, 1001-1006.
[5] Jacob, M.J. (2015) Design and Construction of an Offshore Floating Nuclear Power Plant. Massachusetts-Institute of Technology, Cambridge, MA.
[6] Lee, K.-H., Kim, M.-G., Lee, J.I. and Lee, P.-S. (2015) Recent Advances in Ocean Nuclear Power Plants. Energies, 8, 11470-11492. [Google Scholar] [CrossRef] 
[7] Ingersoll, D.T., Houghton, Z.J., Bromm, R. and Desportes, C. (2014) NuScale Small Modular Reactor for Co-Generation of Electricity and Water. Desalination, 340, 84-93. [Google Scholar] [CrossRef] 
[8] 赵松, 宋岳. 国内外浮动式核电站发展综述[C]//中国核学会2017年学术年会. 中国核科学技术进展报告. 威海: 中国核学会, 2017: 93-98.
[9] Lee, K., Lee, K.H., Lee, J.I., Jeong, Y.H. and Lee, P.-S. (2013) A New Design Concept for Offshore Nuclear Power Plants with Enhanced Safety Features. Nuclear Engineering and Design, 254, 129-141. [Google Scholar] [CrossRef] 
[10] Santinello, M. and Ricotti, M. (2018) Preliminary Analysis of an Integral Small Modular Reactor Operating in a Submerged Containment. Progress in Nuclear Energy, 107, 90-99. [Google Scholar] [CrossRef] 
[11] Santinello, M., Ricotti, M.E., Ninokata, H., et al. (2017) External Heat Transfer Capability of a Submerged SMR Containment: The Flexblue Case. Progress in Nuclear Energy, 96, 62-75. [Google Scholar] [CrossRef] 
[12] Kang, K.J., Chuna, J.-H., Kang, H.-O., Jeon, S.S. and Hong, S.J. (2018) Evaluation of Passive Containment Pressure Suppression and Radioactivity for SMR. Transactions of the Korean Nuclear Society Autumn Meeting, Yeosu, Korea, 25-26 October, 2018, 1-2.
[13] Erbacher, F.J. and Neitzel, H.J. (1995) Passive Containment Cooling by Natural Air Convection. Nuclear Technology, 111, 386-394. [Google Scholar] [CrossRef] 
[14] Peng, Y.K. and Tan, S.S. (2002) Investigation on the Passive Containment Cooling System of an AC-PWR. Abstracts of the 13th Pacific Basin Nuclear Conference. Berlin, Springer, 225-234.
[15] Kang, K.J., Kang, H.-O., Jeon, S.S. and Hong, S.J. (2018) Concept Design Evaluation of Passive Containment Pressure and Radioactivity Suppression System with Cooling Tank for SMR. Transactions of the Korean Nuclear Society Autumn Meeting, Yeosu, Korea, 25-26 October 2018, 1-2.