正交异性板裂纹端部应力及变形通解
General Solution of Stress and Deformation at Crack-Tip for Orthotropic Plate
摘要: 本文根据正交异性板的力学性能，确定平面应力弹性力学的基本方程，利用复变函数方法求解含裂纹正交异性板的应力边值问题。采用I型裂纹作为典型实例，讨论了裂纹端部应力与变形的一般解法，推导出正交异性板的奇异应力和应变场，并得到裂纹张开位移与材料特性的关系。
Abstract:
The basic equation of elastic mechanics at plane stress state is determined by the mechanical characteristic of orthotropic plate. The stress boundary problem about the orthotropic plate with a crack is solved by using the complex function method. To take Mode I crack problem for the typical example, the general solution method is discussed for the stress and deformation near the crack-tip. And the singular stress and strain fields are derived for the orthotropic plate. The crack opening displacement is yet obtained to have a relation with the material characteristics.
参考文献
|
[1]
|
张行. 断裂与损伤力学[M]. 北京: 北京航空航天大学出版社, 2009.
|
|
[2]
|
郦正能, 张纪奎. 工程断裂力学[M]. 北京: 北京航空航天大学出版社, 2012.
|
|
[3]
|
Sih, G.C. (1991) Mechanics of Fracture Initiation and Propagation. Kluwer Academic Publishers, The Netherlands. [Google Scholar] [CrossRef]
|
|
[4]
|
Friedrich, K. (1989) Application of Fracture Mechanics to Composite Materials. Elsevier Science Publisher, The Netherlands.
|
|
[5]
|
杨维阳, 李俊林, 张雪霞. 复合材料断裂复变方法[M]. 北京: 科学出版社, 2005.
|
|
[6]
|
李群, 欧卓成, 陈宜亨. 高等断裂力学[M]. 北京: 科学出版社, 2017.
|
|
[7]
|
Jia, P.R., Suo, Y.Y., Jia, C. and Wang, Q. (2019) Stress Analysis of Orthotropic Wedge Loaded on the Apex. IOP Conference Series: Materials Science and Engineering, Vol. 585, Changsha, 17-18 May 2019, 448-453. [Google Scholar] [CrossRef]
|
|
[8]
|
Zhang, H. and Qiao, P.Z. (2019) A State-Based Peri-dynamic Model for Quantitative Elastic and Fracture Analysis of Orthotropic Materials. Engineering Fracture Mechanics, 206, 147-171. [Google Scholar] [CrossRef]
|