表面特性对沸腾传热影响的研究进展
Research Progress on Influence of Surface Properties on Boiling Heat Transfer
DOI: 10.12677/NST.2022.101001, PDF,   
作者: 唐吴宇, 周磊, 张君毅, 闫 晓：中核核反应堆热工水力技术重点实验室，四川 成都
关键词: 沸腾传热；表面特性；粗糙度；润湿性；微观结构；Boil Heat Transfer； Surface Characteristics； Roughness； Wettability； Microstructure
摘要: 沸腾传热是一种常见的高效传热方式，在反应堆堆芯、蒸汽发生器等反应堆关键部位均存在沸腾现象。沸腾传热受多种因素影响，其中表面特性对沸腾传热的影响较为显著。通过对表面特性的调控，可以实现沸腾传热性能的提升。本文追踪了表面粗糙度、润湿性以及微观结构等表面特性对沸腾传热影响研究的最新进展，介绍了相关的实验研究方法和主要结论，梳理了针对表面特性影响沸腾传热的研究思路，并进一步指出耦合宏观与微观尺度表面特性的精细化研究是未来的发展方向。
Abstract: Boiling heat transfer is a common and efficient heat transfer method, it occurs in both reactor cores and steam generators. Boiling heat transfer is affected by many factors, among which the surface characteristics have a significant effect on boiling heat transfer. The boiling heat transfer ability can be improved by regulating the surface characteristics. This paper focuses on the effects of surface characteristics such as surface roughness, wettability and microstructures on boiling heat transfer, which involves in relevant experimental research methods and main conclusions. This paper also combs the research route on the influence of surface characteristics on boiling heat transfer, and further points out that the future development direction is the fine research on the influence of coupled macroscopic and microscopic scale surface characteristics parameters.
文章引用：唐吴宇, 周磊, 张君毅, 闫晓. 表面特性对沸腾传热影响的研究进展[J]. 核科学与技术, 2022, 10(1): 1-8. https://doi.org/10.12677/NST.2022.101001

参考文献

[1] 郝老迷, 胡古, 郭春秋, 等. 沸腾传热和气液两相流动[M]. 哈尔滨: 哈尔滨工程大学出版社, 2016.
[2] Jakob, M. (1937) Heat Transfer in Evaporation and Condensation. University of Illinois, Champaign.
[3] Kurihara, H.M. and Myers, J.E. (1960) The Effects of Superheat and Surface Roughness on Boiling Coefficients. AIChE Journal, 6, 83-91. [Google Scholar] [CrossRef] 
[4] Tolubinskiy, V., Kostanchuk, D. and Ostrovskiy, Y.N. (1971) Effect of Surface Finishing on Heat Transfer Intensity at Water Boiling, Vop. Tekhn. Teplophy. Prob Eng Ther Phy, 3, 12-14.
[5] Grigor’ev, V., Pavlov, Y.M. and Aletistov, B. (1977) Boiling of Cryogenic Fluids. (In Russian)
[6] Pioro, I.L., Rohsenow, W. and Doerffer, S.S. (2004) Nucleate Pool-Boiling Heat Transfer. I: Review of Parametric Effects of Boiling Surface. International Journal of Heat and Mass Transfer, 47, 5033-5044. [Google Scholar] [CrossRef] 
[7] Wang, C.H. and Dhir, V.K. (1993) Effect of Surface Wettability on Active Nucleation Site Density during Pool Boiling of Water on a Vertical Surface. Journal of Heat Transfer, 115, 659-669. [Google Scholar] [CrossRef] 
[8] Phan, H.T., Caney, N., Marty, P., et al. (2009) How Does Surface Wettability Influence Nucleate Boiling? Comptes Rendus Mécanique, 337, 251-259. [Google Scholar] [CrossRef] 
[9] Forrest, E., Williamson, E., Buongiorno, J., et al. (2010) Augmen-tation of Nucleate Boiling Heat Transfer and Critical Heat Flux Using Nanoparticle Thin-Film Coatings. International Journal of Heat Mass Transfer, 53, 58-67. [Google Scholar] [CrossRef] 
[10] Betz, A.R., Xu, J., Qiu, H., et al. (2010) Do Surfaces with Mixed Hydrophilic and Hydrophobic Areas Enhance Pool Boiling? Applied Physics Letters, 97, Article ID: 141909. [Google Scholar] [CrossRef] 
[11] Yang, C. and Yu, C. (2013) Pool Boiling of Micro-/Nanoparticles Modi-fied Aluminum Surface. 2013(7): 1-6. [Google Scholar] [CrossRef] 
[12] 赵鹏飞, 冀文涛, 赵二涛, 等. 不同润湿性表面池沸腾换热特性研究[J]. 中国科技论文, 2018, 13(11): 1211-1215.
[13] 马强, 吴晓敏, 朱毅. 表面润湿性对核态池沸腾影响的实验研究[J]. 工程热物理学报, 2019, 40(3): 635-638.
[14] Honda, H., Takamastu, H. and Wei, J.J. (2002) Enhanced Boil-ing of FC72 on Silicon Chips with Micro-Pin-Fins and Submicron-Scale Roughness. Transactions of the Japan Society of Mechanical Engineers, Part B, 124, 519-526. [Google Scholar] [CrossRef] 
[15] Rainey, K., Li, G. and You, S. (2001) Flow Boiling Heat Transfer from Plain and Microporous Coated Surfaces in Subcooled FC-72. Journal of Heat Transfer, 123, 918-925. [Google Scholar] [CrossRef] 
[16] Chen, Y., Mo, D.C., Zhao, H.B., et al. (2009) Pool Boiling on the Super-hydrophilic Surface with TiO2 Nanotube Arrays. Science in China Series E: Technological Sciences, 52, 1596-1600. [Google Scholar] [CrossRef] 
[17] Dong, L., Quan, X. and Cheng, P. (2014) An Experimental Inves-tigation of Enhanced Pool Boiling Heat Transfer from Surfaces with Micro/Nano-Structures. International Journal of Heat Mass Transfer, 71, 189-196. [Google Scholar] [CrossRef] 
[18] Kim, S.H., Lee, G.C., Kang, J.Y., et al. (2015) Boil-ing Heat Transfer and Critical Heat Flux Evaluation of the Pool Boiling on Micro Structured Surface. International Journal of Heat Mass Transfer, 91, 1140-1147. [Google Scholar] [CrossRef] 
[19] 胡柏松, 陈兴林, 张少峰, 等. 微纳耦合表面池沸腾强化传热的实验研究[J]. 工程热物理学报, 2017, 38(12): 2725-2730.
[20] 伏泊霖. 飞秒激光制备微纳结构表面的热传输特性研究[D]: [硕士学位论文]. 长春: 长春理工大学, 2019.