|
[1]
|
冯忠绪. 混凝土搅拌理论与设备[M]. 北京: 人民交通出版社, 2001.
|
|
[2]
|
胡连花. 高效率低能耗混凝土搅拌装置的研究[D]: [硕士学位论文]. 济南: 山东大学, 2015.
|
|
[3]
|
冯忠绪, 江建卫, 于丽娟, 等. 搅拌设备设计讲座(第十四讲)混凝土振动搅拌技术[J]. 工程机械, 2008, 39(4): 63-66+103.
|
|
[4]
|
边策, 李金明, 田正宏, 苏振华. 受振混凝土流变性试验研究[J]. 水利规划与设计, 2020(10): 94-100+145.
|
|
[5]
|
王玄丰. 振动搅拌高性能混凝土的设备参数优化研究[D]: [硕士学位论文]. 西安: 长安大学, 2019.
|
|
[6]
|
Bao, Y.Y., Li, T.C., Wang, D.F., Cai, Z.Q. and Gao, Z.M. (2020) Discrete Element Method Study of Effects of the Impeller Configuration and Operating Conditions on Parti-cle Mixing in a Cylindrical Mixer. Particuology, 49, 146-158. [Google Scholar] [CrossRef]
|
|
[7]
|
Chandratilleke, G.R., Dong, K.J. and Shen, Y.S. (2018) DEM Study of the Effect of Blade-Support Spokes on Mixing Performance in a Ribbon Mixer. Powder Technology, 326, 123-136. [Google Scholar] [CrossRef]
|
|
[8]
|
Samsonova, P.S., Lozovaya, S.Y., Bogdanov, N.E. and Lozovoi, N.M. (2020) Mixing Process Simulation of the Initial Building Materials Components Using the DEM So-lution EDEM System. IOP Conference Series: Materials Science and Engineering, 945, Article ID: 012028. [Google Scholar] [CrossRef]
|
|
[9]
|
Nagata, Y., Minagawa, M., Hisatomi, S., Tsunazawa, Y., Okuyama, K., Iwamoto, M., Sekine, Y. and Tokoro, C. (2019) Investigation of Optimum Design for Nanoparticle Dis-persion in Centrifugal Bead Mill Using DEM-CFD Simulation. Advanced Powder Technology, 30, 1034-1042. [Google Scholar] [CrossRef]
|
|
[10]
|
卢兴福, 左志坚, 龚曙光, 谢桂兰, 刘克俭. 非球体颗粒在强力混合机中混匀特性的数值模拟[J]. 烧结球团, 2019, 44(5): 38-42.
|
|
[11]
|
左志坚. 强力混合机粉体颗粒混匀过程及桨叶磨损研究[D]: [博士学位论文]. 湘潭: 湘潭大学, 2020.
|
|
[12]
|
Liu, P.Y., Yang, R.Y. and Yu, A.B. (2013) DEM Study of the Transverse Mixing of Wet Particles in Rotating Drums. Chemical Engineering Science, 86, 99-107. [Google Scholar] [CrossRef]
|
|
[13]
|
冯忠绪, 王卫中, 姚运仕, 赵利军, 江建卫. 搅拌设备设计(第四讲)搅拌机合理转速的确定[J]. 工程机械, 2005, 36(4): 60-64.
|
|
[14]
|
郭良, 赵悟, 王敬, 沈威威. 基于EDEM双立轴振动搅拌机叶片安装角度仿真分析及试验研究[J]. 现代制造技术与装备, 2018(11): 3-6.
|
|
[15]
|
胡国明. 颗粒系统的离散元素法分析仿真[M]. 武汉: 武汉理工大学出版社, 2010.
|
|
[16]
|
Guilkey, J. and Weiss, J.A. (2003) Im-plicit Time Integration for the Material Point Method: Quantitative and Algorithmic Comparisons with the Finite Element Method. International Journal for Numerical Methods in Engineering, 57, 1323-1338. [Google Scholar] [CrossRef]
|
|
[17]
|
Coetzee, C.J., Vermeer, P.A. and Basson, A.H. (2005) The Modelling of Anchors Using the Material Point Method. International Journal for Numerical and Analytical Methods in Geomechan-ics, 29, 879-895. [Google Scholar] [CrossRef]
|