文章引用说明 更多>> (返回到该文章)

戴冰清. 现役钢筋混凝土桥梁承载安全性综合评估方法研究[D]. 南京工业大学, 2012.

被以下文章引用:

  • 标题: 基于ABAQUS对T形梁静载试验的模拟分析The Simulation Analysis of T Beam’s Static Test Based on ABAQUS

    作者: 严亮, 罗韧

    关键字: 损伤塑性模型, ABAQUS, 钢筋混凝土, 本构关系Damage Plastic Model; ABAQUS; Reinforced Concrete; The constitutive relation

    期刊名称: 《Hans Journal of Civil Engineering》, Vol.2 No.3, 2013-07-22

    摘要: 桥梁结构在使用过程中,由于荷载作用会产生结构变形,当变形超过一定限值时,就会影响到桥梁结构的承载稳定性。在现实中通过理论计算来得到桥梁结构的变形值,其工作量是相当大的,甚至有时会很难计算,通过试验和有限元分析计算能够较好的得到桥梁的变形值。本文通过T型试验梁在不同损伤程度下的变形试验值与ABAQUS有限元模拟值进行对比分析研究,发现两者能够较好的吻合,可以运用ABAQUS对桥梁结构进行模拟分析,并依据模拟分析计算的结果来判断桥梁承载稳定性。 Bridge structure in using process, can produce structural deformation due to load, when the deformation exceeds a certain limit, it will affect the bearing of the bridge structure stability. In the reality through the theoretical calculation to get deformation value of the bridge structure workload is very big, even sometimes it is difficult to calculate, the accurate deformation values of the bridge structure can be obtained by experiment and finite element calculation Through the T test beam under different damage degree of deformation test value and ABAQUS finite element simulation of comparative analysis and research, found that one can better matches, can use ABAQUS simulation analysis was carried out on the bridge structure, and according to the results of simulation analysis and calculation to determine bridge bearing stability.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享